Recently caster boards are innovated into different varieties of sizes and shapes. Each model has a unique design and sets of features. In this article, we will evaluate the contrast that exists between Razor Ripsurf and Razor RipStik. Both boards have different designs. The Ripstik is the conventional caster board that has its rear and front (nose and tail) connected with a bar. Conversely, RipSurf is created in the form of surfing board, it has a streamlined edge. The picture below depicts the major difference that exists when we discuss the Ripsurf vs Ripstik debate.
Ripsurf vs Ripstik – Key Differences
Deck Design
The deck is designed from two different platforms which are connected end to end with the use of a torsion bar. This design use torsion to generate motion. Needless to say, the skater doesn’t need to kick off to move the board forward. Each surface has a traction pad that is designed to prevent slipping off and enhance proper footing. The pads of the deck are detachable. It’s created with a nose and a kicktail, which gives its users the ability to carry out different stunts and tricks similar to that of a skateboard.
By the same token, the Razor RipSurf is created in the form of surfing board. The deck is made from a single piece. The innovative design makes torsion possible while in motion. The board has a side cut which is designed to help user maneuver themselves from one point to another. Due to the nature of its design, movement is not easy on it when compared to RipStik. But it has a stylish outfit.
It has a deck made from polypropylene. The surface of the deck is lightly textured to increase the user’s comfort. Although it is not designed to have a kick tail or nose.
The Wheels
At this point, let’s examine the wheels of a RipSurf and a Ripstik. A Razor RipStik is enhanced with a 76-millimeter wheel made from polyurethane with a precision of ABEC 5 bearings. These qualities allow the caster board to increase in speed swiftly. This is one of the basic reasons why this model is popular among players that are dedicated. On the contrary, the Razor RipSurf is designed with 3600 wheels made from urethane.
The wheels are durable and rugged, however, when compared to the wheels of the Ripstik they barely pivot while in motion. But its speed can be accelerated smoothly. The RipSurf can be used to cut and carve similarly to the activity performed on a surfing board, but this time the ground has to be a bit moist. Both RipSturf and RipStik are meant for users that are 8 – 10 years old, with a maximum pounds of 220. Both boards are usable by adults, teenagers, and children.
| RipStik | RipSurf |
| Trailblazing caster board that functions like a snowboard hybrid or a skateboard. | The design allows you the rider to cut and crave similarly to that of a surfboard on a dry surface. |
| Allow snowboard caring while in motion. It can pivot 3600 | A piece of torsion technology |
| It has a traction pad, nose, a kick tail and a concave attached to its deck. | It made from textured traction, polymer construction with a deck kicktail. |
| 76-millimeter polyurethane with a precision that ranges within ABEC-5. | Inclined 360-degree urethane caster wheels
It has a 3600 wheel that is made from urethane caster. |
| Support 220 pounds of weight and its recommended for riders from the age of 8 and above. | Support 220 pounds of weight and is recommended for riders from the age of 8 and above. |
Ripsurf and RipStik have different designs that are quite attractive. The RipStik stick is easy to ride and a go-to option if you are one of those folks who prefer to cruise on a real caster board. Its bearing capacity, high-performance wheels, a suitable nose and kick tail will help you move at the right pace you want to move.. Conversely, if you are a fancy freak, then the surfboard will be an ideal choice.
Leave a Comment